13. How do I replace the front display light (GDP)?

The procedure to replace this bulb is explained in the Owner’s Manual. The freezer power cord must be unplugged when replacing light bulbs. These are simplified steps to replace the bulbs:

  • With a Philips screwdriver, remove two screws that hold side frame (13/22USG) or top frame (44UDG).
  • Slide the lens to gain access to the bulb
  • Rotate the bulb 1/4 turn and pull out of sockets
  • Install new bulb
  • Install lens and frame parts in reverse order as explained above

Leave a Reply

Your email address will not be published.